EN 1360: 2005 Standard Fuel Dispenser Hose for Gasoline Service
|Item code||Inner Diameter||Outer Diameter||Working Pressure||Burst Pressure||Length||Measurement||Weight|
Reinforcement: Single High-strength wire braided.
Temperature: -40℃ to +100℃
Color: Black, Blue, Red and Green etc
Application: For fuel dispensing pump applications, including gasoline, diesel,
oxygenated fuels (up to a maximum of 15% oxygenated compounds),
lubricating oil, and other mineral oil etc.
Standard length: 20m, 50m (Random Length)
Rubber Content of "Paishun's Hose": The NBR Content of Hose Inner Tube is 42% and 40% in Hose Outer
Tube. The High NBR Material Content makes the Hose has excellent
"permeability", so the Hose is able to not " bulge" even being
immersed in High grade gasoline after 72 hours.
Pressure Test: Every batch Hose will be tested under the Test Pressure (10times
higher than the Hose's W.P.) and keeps at least 3 minutes, this is
to avoid any invisible holes appear on Hose.
The Wire we use: The hose is constructed of single-wire braid to provide static
increase hose strength.The tensile strength of Single Wire we use is 2750 Newton high
strength wire, the wire diameter is 0.295mm.
Quality warranty: The Quality warranty for our Hose is 12months.
But in real application, if you use it under correct conditions,
there's no problem to use for 24months.